Image

If your Sbcglobal email account is merged with Yahoo and you are trying to configure your account in Outlook, you can do so without difficulty through following the step-by means of-step commands provided in this post. Also, to configure your Sbcglobal Email Account on Outlook, you must have information about SbcGlobal Email Settings. Below you may locate the entire Sbcglobal net Email Settings along with facts on a way to configure your Sbcglobal e mail account on Outlook on this manual below.

Sbcglobal Email Settings Process(IMAP)

Incoming Mail (IMAP) Server

  • Server:mail.yahoo.com
  • Port: 993
  • Requires SSL: Yes

Outgoing Mail (SMTP) Server

  • Server:mail.yahoo.com
  • Port: 465 or 587
  • Requires SSL: Yes
  • Requires authentication: Yes

Your login info

  • Email address: Your complete email address
  • Password: Your account’s password
  • Requires authentication: Yes

Sbcglobal Email Settings Process (POP)

Incoming Mail (IMAP) Server

  • Server:mail.yahoo.com
  • Port: 995
  • Requires SSL: Yes

Outgoing Mail (SMTP) Server

  • Server:mail.yahoo.com
  • Port: 465 or 587
  • Requires SSL: Yes
  • Required TLS: Yes (If available)
  • Requires authentication: Yes

Your login info

  • Email address: Your complete email address
  • Password: Your account’s password
  • Requires authentication: Yes

Conclusion: This post will help you our for sbcglobal email settings for outlook

EMAIL PROTOCOLINBOUND SERVERINBOUND PORTSSLOUTBOUND SERVEROUTBOUND PORT
IMAPimap.mail.att.net993Yessmtp.mail.att.net465 or 587
POP3Inbound.att.net995Yesoutbound.att.net465

Steps to Setup SBCGlobal Email Account on Outlook Using Incoming IMAP

  1. Open the Outlook email program and select the File option located on the upper-left corner of the window. Under File, select Account Settings in the Info
  2. On the next screen, enter your details on the Auto Account Set-up screen and click Next.
  3. Next, Outlook will configure your SbcGlobal email account automatically as an IMAP account with appropriate settings.
  4. After that, click on the Finish button and then on the Close

NOTE: In case you are unable to configure your SBCGlobal.Net email account through an automatic configuration process, you can set your account manually by following these instructions:

  1. Select File option in your Outlook program located on the upper-left corner of the window and go to Info > Account Settings
  2. Next, select Manual Setup or additional server type and click Next.
  3. Then, you will need to select POP or IMAP option and press the Next
  4. On the subsequent screen, enter the following information in the relevant fields on your screen:

User Information

  • Your Name: Enter your name
  • Email Address: Enter your SBCGlobal.Net email address

Server Information

  • Account Type: POP3/IMAP
  • Incoming mail server:mail.att.net
  • Outgoing mail server (SMTP):mail.att.net

Login Information

  • User Name: Enter your name
  • Password: Enter your email account’s password
  1. After you are done entering the required information, click on the More Settings option located on the same window in the lower-right corner. In the More Settings section, enable the following options:
  • My Outgoing server (SMTP) requires authentication
  • Use same settings as my incoming mail server
  1. Next, you will need to go to the Advanced tab and verify your settings using the following information:

POP Port Settings for SBCGLOBAL.NET

  • Incoming Port(POP3): 110,
  • Outgoing Port(SMTP): 465 or 587
  • General settings for POP
    • Secure – Port: 995 and Security Type: SSL/TLS (Accept all certificates)
    • Insecure – Port: 110
    • Security Type: None (Accept all certificates)
  • Not Selected: This server requires an encrypted connection (SSL)
  • Use the following type of encrypted connection: None

IMAP Port Settings for SBCGlobal.Net

  • Incoming Port: 143,
  • Outgoing Port: 465
    • Secure – Port: 993
    • Security Type: SSL/TLS (Accept all certificates)
    • Insecure – Port: 143
    • Security Type: None (Accept all certificates
  • Not Selected: This server requires an encrypted connection (SSL)
  • Use the following type of encrypted connection: None

NOTE: For Secure SSL /TLS Settings, select the checkbox next to “This service requires a secure connection (SSL)” in both – Outgoing and Incoming emails.

General SMTP Port Settings for SBCGlobal.Net

  • Outgoing (SMTP) Secure – Port: 465
  • Security Type: SSL/TLS (Accept all certificates)
  • Outgoing (SMTP roaming server) Secure – Port: 587
  • Security Type: SSL/TLS (Accept all certificates)
  • Outgoing (SMTP) – Port: 25
  • Security Type: None (Accept all certificates)
  • Outgoing (SMTP roaming server) Insecure – Port: 587
  • Security Type: None (Accept all certificates)
  1. Once you are done following the above-mentioned instructions, you will need to click on the OK button to save the settings. Then, you will need to click on the Next and Finish button to finish the configuration process.