The total focusing method can be an ultrasonic array as a post-processing technique and Ultrasonic Instrument can be used to synthetically focus at every point of a point of region interest. The full matrix can capture is another way of collecting phased array data.
So this technique cannot require any knowledge of the piece to be inspected. So each element can be just activated one by one. So all the laments can be a reception, recorded and a matrix of the signal and it can be stored to be processed.
About Methods of Ultrasonic Instrument and Total Focusing
The full matrix capture is a specific data acquits ion process for using ultrasonic phased array probes. This is an array of elements can be successively used as transmitter .so all the elements can be used as receivers. The EddyFi can illustrate the sequencing of the host fired bypassed array probe which is used for FMC.
So the data can be organized is a matrix so it contains well-acquired signals. So Total Focusing Method can contain the signal can be transmitted by element and received by an element. This signal processing is called the total focusing method. Iota is a computation zone can be defined for the data reconstruction.
Usage of Instruments
This zone can mesh for each point on the grid. The focal laws can be calculated for the entire has set of elements of the phased array probe. So all the signals have time accordingly benefit summation for every point of the grid. So the focal laws can be calculated for the entire set of elements of the phased array probe.
So all the signals can be time-shifted according to summation at every point of the grid. So the loops end for the construction can be done for every point of the mesh. The data acquisition and post-processing can results image. So all the side can be drilled holes and it can be located under the probe. So they are clearly identified as the bottom surface.